We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Strike FSA Dual Folder (Stabilizer Edition)
In stock
SKU
SI-FSA-DUAL-STAB-N-OPT
Buy this product and
Earn 10 to 79 Reward Points click here
to login
The Strike FSA Dual Folding Adapter - Stabilizer Edition is a versatile and innovative patented system that offers unparalleled convenience and flexibility. With its intuitive folding mechanism, you can fold the adapter to either the left or right side of your weapon platform. Without the need to reconfigure or reinstall any parts, the provided locking mechanism has a positive lock and ensures its ability to stay in place.
Deployment is quick and effortless with just a simple upward pull on the bar near the hinge. Its 3-degree tilt angle is designed to help prevent interference with your weapon's ejection port when folded to the right as well. This adapter fits directly onto a 1913 Picatinny interface with built-in locking lugs for secure attachment.
The included Stabilizer end is a great ergonomic option for completing your pistol build. Strike's Dual FSA's name comes from its interchangeability to swap out the Stabilizer end to a Stock end, should you desire to have a Short Barrel Rifle, (or SBR) configuration.
A single QD point is located on the rear of the stabilizer. The Strike Dual Folding Adapter is constructed with a steel hinge and 6061-T6 Aluminum base, adapter & strut. Get a unique modular system with interchangeable (sold separately) parts like optional cheek riser (to be only used legally with stock setup), strut lengths and other accessories.
Use with almost any 1913 Picatinny rear end like the Strike AR Picatinny Stock Adapter or many factory OEM weapons with a Picatinny rail section in place of the traditional AR buffer tube threads. The Strike Dual Folding Adapter is a one of a kind adapter that gives you more options than anything on the market for those who want a truly modular folder that is under 10 ounces.
Deployment is quick and effortless with just a simple upward pull on the bar near the hinge. Its 3-degree tilt angle is designed to help prevent interference with your weapon's ejection port when folded to the right as well. This adapter fits directly onto a 1913 Picatinny interface with built-in locking lugs for secure attachment.
The included Stabilizer end is a great ergonomic option for completing your pistol build. Strike's Dual FSA's name comes from its interchangeability to swap out the Stabilizer end to a Stock end, should you desire to have a Short Barrel Rifle, (or SBR) configuration.
A single QD point is located on the rear of the stabilizer. The Strike Dual Folding Adapter is constructed with a steel hinge and 6061-T6 Aluminum base, adapter & strut. Get a unique modular system with interchangeable (sold separately) parts like optional cheek riser (to be only used legally with stock setup), strut lengths and other accessories.
Use with almost any 1913 Picatinny rear end like the Strike AR Picatinny Stock Adapter or many factory OEM weapons with a Picatinny rail section in place of the traditional AR buffer tube threads. The Strike Dual Folding Adapter is a one of a kind adapter that gives you more options than anything on the market for those who want a truly modular folder that is under 10 ounces.
Product Specs
- Added Length (Stabilizer): 9.24" (234.64mm)
- Added Length (Folded): 1.02" (26.00mm)
- Length (Fully Assembled): 9.44" (240.50mm)
- Width: 2.09" (53.05mm)
- Height: 5.59" (141.95mm)
- Weight: 9.60 oz
- Material: Steel hinge, 6061-T6 Aluminum base, adapter & strut
- Mount Interface: 1913 Picatinny
Product Contents
*Includes the following items:*
- 1x Strike Dual Folding Adapter (fully assembled with stabilizer)
- 1x Torx Tool (T25)
- 1x Warning Card
Notes
- Pressing buttons simultaneously will remove bar from hinge.
- Lubrication of hinge and button components needed for routine maintenance.
- Rubber Pad Note: Watch this video: How do the rubber pads work? (click link here)
- Included rubber pads in various thicknesses are for the two (x2) indentations located inside the Dual Folding Adapter side that faces the bar. Unfold and insert the desired rubber pad thickness to adjust the desired locking tension when fully deployed.
Compatibility
- Mount: Rear-facing 1913 Picatinny rails
- Strike AR Picatinny Stock Adapter
- B&T APC9/45, APC223/300, GHM
- Brownells BRN-180 lower receiver
- CZ Bren 2
- CZ Scorpion EVO pistol w/ SI Stock Adapter Back Plate
- Galil ACE
- Ruger PC Charger
- SIG SAUER MCX/MPX
Product Features
- Patented first-in-market Picatinny dual folding adapter with intuitive unfolding system
- Folds left or right anytime without flipping or reconfiguring hinge
- Positive lock in the folded position
- Includes rubber pads for indentation to adjust desired locking tension when fully deployed
- Rapid deployment
- 3-degree downward tilt to help prevent interference with ejection port when folded to right side
- Mounts directly to 1913 Picatinny interface with 2 built-in locking lugs
- Single rear QD sling mounting point
- Steel hinge with 6061-T6 Aluminum base, adapter, & strut
- Lightweight at under 10 ounces
Disclaimers & Warnings
- Dirt and/or sand can hinder folding hinge proper operation
- Not recommended for use while mortaring firearm to clear malfunctions
- Expect wear and tear on folding locking mechanism from long term use
- Be careful, avoid fingers from getting caught during folding and unfolding process
- Always check with your state and local laws. We are not lawyers and cannot provide legal advice.
- Stabilizer was designed and intended for use as a stabilizing accessory for one-handed firing along with rear QD sling attachment point.
- Do not use on heavy-recoil or high-powered firearms
- Recoil Force Limitation: This product is engineered exclusively for low-recoil, rimfire, pistol-caliber, and intermediate cartridge platforms. This product is not intended for use with full-power rifle cartridges. Do not install or use this product on high-recoil firearm platforms.
- Risk of Unintended Folding: Exceeding the intended recoil threshold will cause the friction interface to fail, resulting in the mechanism unlatching or unexpectedly folding during live fire.
- Hazard Warning: Sudden collapse of the stock/stabilizer during discharge can lead to a loss of firearm control, equipment failure, and severe bodily injury.
- Pre-Use Inspection: Always ensure the hinge mechanism is fully seated and engaged before operation. Discontinue use immediately if friction fit becomes loose or degraded.
- Not intended for mortaring, striking, or heavy impact.
- Before every use, always check proper function of your QD mount and/or sling loop and any wear and tear from use
- Always have your weapon in the SAFE position when not being fired
- Always follow all firearms safety rules and never point your weapon at anything you are not willing to destroy
California Proposition 65 Warning
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
Package Contents:
-x1 Strike Dual Folding Adapter (fully assembled with stabilizer)
-x1 Torx Tool (T25)
-x1 Warning Card
Product Features:
-Patented first-in-market Picatinny dual folding adapter with intuitive unfolding system
-Folds left or right anytime without flipping or reconfiguring hinge
-Positive lock in the folded position
-Includes rubber pads for indentation to adjust desired locking tension when fully deployedv
-Rapid deployment
-3-degree downward tilt to help prevent interference with ejection port when folded to right side
-Mounts directly to 1913 Picatinny interface with 2 built-in locking lugs
-Single rear QD sling mounting point
-Steel hinge with 6061-T6 Aluminum base, adapter, & strut
-Lightweight at under 10 ounces
Product Specifications:
OVERALL LENGTH:[Stabilizer] adds 9.24" (234.64mm)
FOLDED OVERALL LENGTH: Adapter adds 1.02” (26.00mm) to overall weapon length in folded position
FULLY ASSEMBLED w/ STABILIZER:
-LENGTH: 240.50mm (9.44")
-WIDTH: 53.05mm (2.09")
-HEIGHT: 141.95mm (5.59")
-WEIGHT: 9.60 oz
PLATFORM COMPATIBILITY:
-Rear-facing 1913 Picatinny rails
-Strike AR Picatinny Stock Adapter
-B&T APC9/45, APC223/300, GHM
-Brownells BRN-180 lower receiver
-CZ Bren 2
-CZ Scorpion EVO pistol w/ SI Stock Adapter Back Plate
-Galil ACE
-Ruger PC Charger
-SIG SAUER MCX/MPX
PLEASE NOTE:
-Dirt and/or sand can hinder folding hinge proper operation.
-Not recommended for use while mortaring firearm to clear malfunctions.
-Expect wear and tear on folding locking mechanism from long term use.
-Be careful, avoid fingers from getting caught during folding and unfolding process.
WARNING:
-DO NOT USE ON HEAVY-RECOIL OR HIGH-POWERED FIREARMS
-RECOIL FORCE LIMITATION: THIS PRODUCT IS ENGINEERED EXCLUSIVELY FOR LOW-RECOIL, RIMFIRE, PISTOL-CALIBER, AND INTERMEDIATE CARTRIDGE PLATFORMS. THIS PRODUCT IS NOT INTENDED FOR USE WITH FULL-POWER RIFLE CARTRIDGES. DO NOT INSTALL OR USE THIS PRODUCT ON HIGH-RECOIL FIREARM PLATFORMS.
-RISK OF UNINTENDED FOLDING: EXCEEDING THE INTENDED RECOIL THRESHOLD WILL CAUSE THE FRICTION INTERFACE TO FAIL, RESULTING IN THE MECHANISM UNLATCHING OR UNEXPECTEDLY FOLDING DURING LIVE FIRE.
-HAZARD WARNING: SUDDEN COLLAPSE OF THE STOCK/STABILIZER DURING DISCHARGE CAN LEAD TO A LOSS OF FIREARM CONTROL, EQUIPMENT FAILURE, AND SEVERE BODILY INJURY.
-PRE-USE INSPECTION: ALWAYS ENSURE THE HINGE MECHANISM IS FULLY SEATED AND ENGAGED BEFORE OPERATION. DISCONTINUE USE IMMEDIATELY IF FRICTION FIT BECOMES LOOSE OR DEGRADED.
-NOT INTENDED FOR MORTARING, STRIKING, OR HEAVY IMPACT.
-Before every use, always check proper function of your QD mount and/or sling loop and any wear and tear from use
-Always have your weapon in the SAFE position when not being fired
-Always follow all firearms safety rules and never point your weapon at anything you are not willing to destroy
DISCLAIMER:
-Always check with your state and local laws. We are not lawyers and cannot provide legal advice.
-Stabilizer was designed and intended for use as a stabilizing accessory for one-handed firing along with rear QD sling attachment point.
-CALIFORNIA PROPOSITION 65 WARNING:-
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
|
|
|||
|
The Strike FSA Dual Folding Adapter - Stabilizer Edition is a versatile and innovative patented system that offers unparalleled convenience and flexibility. With its intuitive folding mechanism, you can fold the adapter to either the left or right side of your weapon platform. Without the need to reconfigure or reinstall any parts, the provided locking mechanism has a positive lock and ensures its ability to stay in place. Deployment is quick and effortless with just a simple upward pull on the bar near the hinge. Its 3-degree tilt angle is designed to help prevent interference with your weapon's ejection port when folded to the right as well. This adapter fits directly onto a 1913 Picatinny interface with built-in locking lucks for secure attachment. The included Stabilizer end is a great ergonomic option for completing your pistol build. Strike's Dual FSA's name comes from its interchangeability to swap out the Stabilizer end to a Stock end, should you desire to have a Short Barrel Rifle, (or SBR) configuration. A simple pull up on the bar near the hinge and back for quick deployment when folded. A 3-degree down tilt angle is added to help prevent interference with the weapons ejection port when folded to the right side. The Strike Dual Folding Adapter mounts directly to a 1913 Picatinny interface with two (x2) built-in locking lugs for a secure attachment. For the stock rear piece, included is a rear rubber anti-slip buttpad to create the best possible shoulder weld for rifle or registered Short-Barrel Rifle (SBR) setups. A single QD point is located on the rear of the stabilizer and ambidextrous QD sling mounting points for the stock. The Strike Dual Folding Adapter is constructed with a steel hinge and 6061-T6 Aluminum base, adapter & strut. Get a unique modular system with interchangeable (sold separately) parts like optional cheek riser (to be only used legally with stock setup), strut lengths and other accessories. Use with almost any 1913 Picatinny rear end like the Strike AR Picatinny Stock Adapter or many factory OEM weapons with a Picatinny rail section in place of the traditional AR buffer tube threads. The Strike Dual Folding Adapter is a one of a kind adapter that gives you more options than anything on the market for those who want a truly modular folder that is under 10 ounces. |
|||
| PACKAGE CONTENTS: |
|
||
| PRODUCT SPECIFICATIONS: |
|
||
| PRODUCT FEATURES: |
|
||
| PLATFORM COMPATIBILITY: |
|
||
| NOTES: |
| ||
| Video link | |||
| DISCLAIMER: | Always check with your state and local laws. We are not lawyers and cannot provide legal advice. Stabilizer was designed and intended for use as a stabilizing accessory for one-handed firing along with rear QD sling attachment point. | ||
| CALIFORNIA PROPOSITION 65 WARNING: | This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov | ||
|
|
||||
|
Strike FSA Dual Folding Adapter - Stabilizer Edition is a versatile and innovative patented system that offers unparalleled convenience and flexibility. With its intuitive folding mechanism, you can fold the adapter to either the left or right side of your weapon platform without the need to reconfigure or reinstall any parts. The locking mechanism provides a positive lock, ensuring it stays in place. Deployment is quick and effortless with just a simple upward pull on the bar near the hinge. Its 3-degree tilt angle helps prevent interference with the ejection port when folded to the right. This adapter fits directly onto a 1913 Picatinny interface with built-in locking lugs for secure attachment. The included stabilizer end is an ergonomic option for completing your pistol build. Strike’s Dual FSA allows interchangeability with a stock end (sold separately) for a Short Barrel Rifle (SBR) configuration. The Strike Dual Folding Adapter is constructed with a steel hinge and 6061-T6 aluminum base, adapter & strut. It offers modularity with optional cheek risers, strut lengths, and other accessories. |
||||
| PACKAGE CONTENTS: |
|
|||
| PRODUCT SPECIFICATIONS: |
|
|||
| PRODUCT FEATURES: |
|
|||
| PLATFORM COMPATIBILITY: |
|
|||
| NOTES: |
|
|||
| Additional Add On's | ||||
|
||||
| DISCLAIMER: | Always check with your state and local laws. We are not lawyers and cannot provide legal advice. Stabilizer was designed and intended for use as a stabilizing accessory for one-handed firing along with rear QD sling attachment point. | |||
| CALIFORNIA PROPOSITION 65 WARNING: | This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov | |||
