Extended Magazine Plate for GLOCK™ G17(9mm) / Glock 22(40cal) & EMP Pocket Clip Combo

NOTES:
-Clip placement location is viewed left or right from ther back side of the magazine. Example: if you want bullets facing forward and magazine in left hand pocket, pick RIGHT side EMP Clip.
-See PRODUCT SPEC for set screw application

WARNING: DO NOT OVERTIGHTEN set screw when installing the steel locking plate. Steel locking plate may appear "loose" however when the set screw is flush with the back of the EMP body, you do not have to tighten any more. Overtightening from this point on will potentially damage your product. See instructional video for proper installation of item. If you are unsure, please contact our customer support team or consult with your local gunsmith.  

Extended Magazine Plate for GLOCK™ G17(9mm) / Glock 22(40cal):
The Strike Industries Extended Magazine Plate for GLOCK™ G17 9MM / G22 .40CAL was designed to provide smoother magazine reloading through a slow drag / no snag design while maintaining maximum magazine capacity with any OEM GLOCK™ magazine. The Extended Magazine Plate provides an additional 6 rounds to any G17 GLOCK™ magazine in addition to adding plus 5 to any G22 .40 cal magazine. Included is our special steel locking plate. Compared to other magazine extension plates on the market, our steel  locking plate features a hook design which adds extra locking security to increase the durability of your magazine & extended magazine plate when fully loaded with rounds.  Our extended magazine plate provides better gripping and overall control along with increasing the overall efficiency of reloads. Give your GLOCK the extra rounds it deserves with the Strike Industries Extended Magazine Plate for GLOCK™ G17 9mm / G22 .40 CAL.
Package Contents:
- 1x Magazine Plate Extension for GLOCK G17 9mm / G22 .40cal
- 1x Extended length spring
- 1x Steel locking plate
- 1x Steel locking plate set screw
Product Features:
- Plus 6 round capacity for G17/9mm 
- Plus 5 round capacity for G22/40cal 
- Low drag/No snag design
- Impact resistant polymer
- Includes Locking steel plate
- Fits USPSA 140mm Race Division Limit

EMP Pocket Clip:
The Strike Industries EMP Pocket Clip gives you a quick and easy way to carry a spare pistol magazine for when you need it. The clip can also help hang or organize magazines in a range bag or safe. Offered for either right or left handed shooters, or however you prefer your bullet facing orientation, this SK-5 carbon steel matte black finish low-profile pocket clip is made to only work with compatible Strike Industries Extended Magazine Plate’s (EMP). This pocket clip attaches directly to compatible SI EMP's to ensure a fast draw with no fuss. Your spare magazine sits where you need it without fishing around in your pocket. With a simple pull, the magazine is in your hand to get you back in the fight. The SI EMP Pocket Clip includes everything you need along with various length set screws (x4) so you can adapt to all compatible Strike EMP's currently offered or any EMP developed in the future. With this new low-budget option, make sure the Strike Industries EMP Pocket Clip is part of your Everyday Carry (EDC) so do not leave home without it.
Package Contents:
-x1 EMP Pocket Clip (right or left)
-x1 Set screw [M4x4mm Socket]
-x1 Set screw [M4x5mm Rounded]
-x1 Set screw [M4x6mm Rounded]
-x1 Set screw [M4x8mm Rounded]
-x1 Hex tool [2.5mm]
-x1 Hex tool [3mm]
Product Features:
-Direct mount to compatible SI Extended Magazine Plate (EMP)
-Available for right or left handed shooters
-Included set screws for variety of SI EMP fitments
-Low-profile
-Matte black finish
-SK-5 carbon steel

DISCLAIMER: DUE TO VARIANCES IN 40 CAL TRUNCATED BULLET DESIGN AND OVERAL LENGTH, SOME FEEDING ISSUES MAY BE EXPERIENCED. LONG BULLET HEADS GENERALLY LEAD TO INCREASED MALFUNCTIONS. IF YOU EXPERIENCE THESE ISSUES, PLEASE CONTACT OUR CUSTOMER SERVICE FOR ASSISTANCE.

COMPATIBILITY:
-For GLOCK™ factory OEM G17/G17L/G19X/G22/G24/G34/G35/G45 double stack magazines
-ETS Magazines that are over 10 rounds. Please note we cannot control or even be aware if ETS ever changes their design and the SI EMP no longer is compatible
-Magwell: tested to work with SI Magwell, Magpul and JP Enterprises
-SI EMP Pocket Clip
NOT COMPATIBLE:
-With any magwells
-10-round magazines
-EMP with SI Grip Plug Tool For GLOCK™ for GEN3 or GEN4&5

NOTE: Not for sale to California residents due to 10-round state laws. The checkout process will show NO shipping method available.

It is the responsibility of the customer to know and abide with local gun laws. 

DISCLAIMER:
-This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
--“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Strike Industries Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

-CALIFORNIA PROPOSITION 65 WARNING:-
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov