AR

Pyramid Angled Rail Adapter

Regular Price: $29.99

Special Price $17.00

Pyramid angled RIS adapter. Use the vertical grip of your choice and put it into a 17 degree angle for enhanced ergonomics. Why buy an additional grip when you already have one? Angle it forward to simulate the Romanian AK handguard or angle it back to add a 2nd front pistol grip similar to a Mk43. When installed back the grip is angled 17 degrees and the same as an AR15 grip.

16" Carbine Dummy Suppressor

$49.99

The Strike Industries' Cobra Series dummy suppressor is designed as a training aid eliminating unnecessary wear on your real suppressors while providing a realistic weight to your rifle for training. It's also a great way to fully enhance the appearance of your rifle by hiding excess barrel length. In addition, by removing the front cap, you can install any ½” x 28 AR threaded compensator for the functional purpose of reducing muzzle flash and recoil.

14.5” Carbine Dummy Suppressor

$44.99

The Strike Industries Cobra Series 14.5” Carbine length dummy suppressor is designed as a training aid eliminating unnecessary wear on your real suppressors while providing a realistic weight to your rifle for training. It's also a great way to fully enhance the appearance of your rifle by hiding excess barrel length. In addition, by removing the front cap, you can install any ½” x 28 AR threaded compensator for the functional purpose of reducing muzzle flash and recoil. 

16” Midlength Dummy Suppressor

$49.99

The Strike Industries' Cobra Series dummy suppressor is designed as a training aid eliminating unnecessary wear on your real suppressors while providing a realistic weight to your rifle for training. It's also a great way to fully enhance the appearance of your rifle by hiding excess barrel length. In addition, by removing the front cap, you can install any ½” x 28 AR threaded compensator for the functional purpose of reducing muzzle flash and recoil.

14.5” Midlength Dummy Suppressor

$44.99

The Strike Industries' Cobra Series dummy suppressor is designed as a training aid eliminating unnecessary wear on your real suppressors while providing a realistic weight to your rifle for training. It's also a great way to fully enhance the appearance of your rifle by hiding excess barrel length. In addition, by removing the front cap, you can install any ½” x 28 AR threaded compensator for the functional purpose of reducing muzzle flash and recoil.

MITCH Handguard Rail Section

$19.95
Strike Industries has added a dynamic item on to the already amazing MITCH handguard rail. Three, one-piece, 6” Picatinny rail adapters will allow users to mount additional accessories to their rifle such as tactical lights, lasers, night vision devices, scopes, and reflex sights.

2pcs Polymer 5 Slot KeyMod Short Rail Section

$19.95
Strike Industries introduces it line of Keymod rail accessories for the KeyMod handguard rail product line (MEGA FINS & AK TRAX). For those who want the lightest possible set up, we have a set of two piece standard polymer 5 section rails. Each polymer rail weights 0.4 oz. and can be place anywhere on the KeyMod rail. Our rail sections are made for our products but will work with most other KeyMod systems

Aluminum KeyMod Rail Section for 45 Degree Panel

$16.95
Strike Industries introduces it line of Keymod rail accessories for the Mega Fins handguard rail. We have a 5 section 45 degree Keymod and a 9 section 45 degree Keymod. Our 45 degree lines of rails are especially useful with the Mega Fins because of their easy plug-in capabilities. They’re a perfect way to run a magnified sight and a red dot at a 45 degree angle for shorter engagements. Our rail sections are made for our Mega Fins rails but will work with most other KeyMod systems

M4 AR-15 Lower Receiver Spring Kit

$8.00
The Strike Industries AR-15 lower Receiver spring replacement kit includes 9 important springs that are commonly replaced or easily lost when building stripped AR-15 lower receivers. The 9-Piece kit includes springs for the bolt catch, disconnector, buffer retainer, trigger, hammer, magazine catch, selector, and two detents.

M4 AR-15 Lower Receiver Spring Kit 20 Piece Gunsmith Box

$80.00
The Strike Industries AR-15 lower Receiver spring replacement kit includes 9 important springs that are commonly replaced or easily lost when building stripped AR-15 lower receivers. The 9-Piece kit includes springs for the bolt catch, disconnector, buffer retainer, trigger, hammer, magazine catch, selector, and two detents.

Dura Mount Series Sling Mount Adapter – Quick Detach (QD) Loop

Regular Price: $28.50

Special Price $15.00

Strike Industries sling mounts are made of lightweight T6 6061 aluminum. Our mounts include a hard matte black anodized coating for a durable finish. Mounting screw is constructed of steel to provide secure mounting. Our DM-03 sling mount features a quick-detach design and is compatible with most quick-detach sling swivels. Since not all guns feature a front and or adjustable sling mount our sling mounts are a great solution to sling mounting problems. A slim profile and and streamline design.

Dura Mount Series Sling Mount Adapter – Quick Detach (QD) Sling Swivel

$11.95
The Strike Industries quick disconnect (QD) sling swivel is a high quality, matte black, reliable quick disconnect that detaches from your rifle with a simple push of a button. Made to be used in conjunction with the Strike Industries Dura Mount Sling Mount adapter or Tactical Sling, the QD Sling Swivel is also compatible with most QD points on rifles and stocks.

Bolt Catch

$9.95
The SI Bolt Catch is another piece in our line of high quality standard part for the AR. Its solid construction and clean matte black finish make it a great looking replacement or build project part. It’s a great value for an essential item. If you need the parts to keep your AR in top shape, look no further that S.I.

AR-15 Lower Receiver Pin Kit

$12.00

The Strike Industries pin kit is a valuable addition to your spare/replacement parts inventory. This kit is comprised of several important lower pins and detents. The kit contains takedown and pivot pins, takedown and pivot pin detents, hammer and trigger pins, selector detents, trigger guard roll pins, bolt catch roll pins and bolt catch plungers. If you're looking to assemble some stripped lower receivers or to replace worn out pins and detents, get your pin kit today! 

AR-15 Lower Receiver Pin Kit PRO kit

$140.00
The Strike Industries pin kit is a valuable addition to your spare/replacement parts inventory. This kit is comprised of several important lower pins and detents. The kit contains takedown and pivot pins, takedown and pivot pin detents, hammer and trigger pins, selector detents, trigger guard roll pins, bolt catch roll pins and bolt catch plungers. If you're looking to assemble some stripped lower receivers or to replace worn out pins and detents, get your pin kit today!

AR .223 / 308 Crush Washer - 1pcs

$1.95
Strike Industries offers replacement components for the AR-15 that are made to military specifications. Available in .223 calibers and .308, these high quality components will provide excellent fit and reliable function in your AR series rifle. They come in PRO sets which are 1 piece bulk packages. The S.I. crush washers are great for replacing your used ones and for installing a new muzzle device onto your AR.

Checkmate Comp (includes crush washer)

$39.95

The battlefield is a game of life and death. Any warrior will tell you having a mental toughness and a sharp mind will give you an advantage in the chess game of combat. It is with this in mind that Strike Industries introduces the “Check Mate” compensator! The Checkmate Comp is a top quality, multifunctional muzzle instrument that is designed with a series of four off-set serrated angled prongs which stabilize climb and recoil as well as reduce flash. The top port set to the right, benefits right-hand shooters with minimizing excessive climb. The aggressive front is an added feature that makes sure no one gets too close. The parkerized steel, design, and detail attest to the quality that SI continues to provide. The Check Mate is sure to dish out the maximum amount of royal pain! If you are interested in a blast shield be sure to check out our combination product page with the FF-CRD offering for this device!

Ambush Sling Loop

$26.50

The Strike Industries Ambush low profile sling loop is the lowest profile sling loop designed for the MIL-STD-1913 rail. Made of solid steel, its unique locking bar design system allows for it to be light weight and durable. Because the Ambush sits flat in between the rails, it will not interfere with your sights and fit neatly under longer optics when mounted towards the middle of the rifle. The dual purpose loop and swivel sling attachments allows the user to choose which mount they would like to use.

(QDSS not included)

Aluminum Key-Mod Long Rail Section 6 Slots - QD featured

$17.95
Strike Industries proudly introduces its new line of Key-Mod Aluminum Rail Section accessories for the Key-Mod handguard rail product line (MEGA FINS & AK TRAX) implementing a Quick Detach receiver Point. By adding the Quick Disconnect receiver users have more placement options than ever before! There is a long type 8-slot KMARS-QD that comes in standard angle and a short 6-slot KMARS-QD piece that comes in a standard angle.

SI AR Steel Gas Block

$29.95
Fit to Mega Fins ver.1 handguard rail Simple and elegant the Strike Industries Steel Gas Block is manufactured to exacting tolerances and is a low profile block that will fit under whatever rail you use. All gas blocks are made to fit barrels that feature a .750 or 3/4-inch gas block mounting surface. With a heptagonal shape, it adds some thickness and strength to the gas block without sacrificing aesthetic appeal. Perfect for you next project!

AR Trigger Hammer Jig

$39.95
This easy to use apparatus allows full assembly and testing of any AR-15 trigger set up prior to installation on your rifle. The AR15 Trigger Jig allows you to clearly see the sear, hammer, and disconnector engagement points while under normal spring tension.

AR-15/M16 Gas Tube Pistol Length 6 3/4" (stainless steel)

$9.95
This short gas tube is made specifically for your AR pistol. Fits currently available 6 1/4" to 7 1/2" pistol barrels. This will work great for replacing your old original gas tube or to complete your new build. Made out of high quality stainless steel. Each roll pin is slightly over-sized to accommodate most gas blocks and can be modified to fit smaller gas blocks.

AR Receiver Extension QD Endplate

$5.95
Our end plate is jam packed with loads of features. The first one being a quick detach (QD) build into it for true ambidextrous shooting. It also incorporates easy attachment points on both sides. You can use just about any sling on the market with this end plate.

AR Receiver Extension Castle Nut

$3.95
Receiver Nut for collapsible receiver extension, also referred to as a Castle Nut. This mil-spec part with fit both the mil-spec and commercial receiver extensions

AR-15/M16 Gas Tube Carbine Length 9 3/4" (5pcs Stainless Steel - Silver color)

$45.00
Strike Industries manufactures the essential parts of you AR with high quality and precision at the best price. A black coated gas tube is the perfect upgrade to match a standard or custom AR build. It comes in 3 sizes, Carbine 9 ¾” , Midlength 11 ¾” , and Rifle 15 1/8”. The matte finish gives off no reflection, so you aren’t giving anything away. Each set comes with a roll pin.

Venom Flash Hider .223/5.56

$44.95

Own one of the world's most effective flash hiders! The SI VENOM FH nearly eliminates 100% of your muzzle flash and quickly disperse the burning gases exploding from the barrel. In return this gives you a faster follow up shots. The four prongs on the end of the brake are designed to protect the muzzle crown and gives this flash hider a one of a kind custom look! This flash hider will significantly reduces muzzle flash to help preserve your night vision. The SI VENOM FH requires no modifications to the rifle for installation. Recommended torque is 15-20 ft-lbs. If you are interested in a blast shield be sure to check out our combination product page with the FF-CRD offering for this device!

Strike Industries Ricci Extended Rail Section

$36.95

 Strike Industries provides a solution to the existing problem of light occlusion for the conventional rifles, especially M4 carbines with short forends. A cantilevered extension rail that places the light as forward of the firearm as possible. The SI RICCI-ERS cantilever rail section will give you 3" more inches in length of mounting room to your existing  hand guard giving you more hand room on your handguard. The ERS can also be used as a rail riser, bridge mount for optics, and even as a blast shield for your muzzle device!!! There are so many great uses for the SI RICCI ERS! The cantilever rail/light mount also features a beveled end and corners to reduce snagging and sharp edges. If you ever needed more room for your flashlight, laser or any other accessories on your weapon system strike industries have you covered! The SI RICCI-ERS cantilever rail section will give you 3" more inches in length of mounting room to your existing  hand guard giving you more hand room on your handguard. The ERS can also be used as a rail riser, bridge mount for optics, and even as a blast sheild for your muzzle device!!! There are so many great uses for the SI RICCI ERS! The cantilever rail/light mount also features a beveled end and corners to reduce snagging and sharp edges. 

Dummy Rounds 45ACP

$5.00
Strike Industries dummy rounds will let you safely test the feeding, extraction, and magazine function of your firearms without the worry of accidental discharge. They also let you dry fire without risking damage to the firing pin.Great training tool for safe handling of any of the most popular firearms calibers. This will aid in keeping your fundamentals sharp and keep the cost down on practice. Made out of polymer material so it can’t corrode or cause corrosion to any of your firearms.