RIFLE

Pyramid Angled Rail Adapter

Regular Price: $29.99

Special Price $17.00

Pyramid angled RIS adapter. Use the vertical grip of your choice and put it into a 17 degree angle for enhanced ergonomics. Why buy an additional grip when you already have one? Angle it forward to simulate the Romanian AK handguard or angle it back to add a 2nd front pistol grip similar to a Mk43. When installed back the grip is angled 17 degrees and the same as an AR15 grip.

Dura Mount Series Sling Mount Adapter – Quick Detach (QD) Loop

Regular Price: $28.50

Special Price $15.00

Strike Industries sling mounts are made of lightweight T6 6061 aluminum. Our mounts include a hard matte black anodized coating for a durable finish. Mounting screw is constructed of steel to provide secure mounting. Our DM-03 sling mount features a quick-detach design and is compatible with most quick-detach sling swivels. Since not all guns feature a front and or adjustable sling mount our sling mounts are a great solution to sling mounting problems. A slim profile and and streamline design.

AK Rear Sight Rail For Low Profile Red Dot Optics

$45.00
Converts AK rear sight into a 1913 Picatinny rail for mounting low-profile optics onto your AK rifle.

16" Carbine Dummy Suppressor

$49.99

The Strike Industries' Cobra Series dummy suppressor is designed as a training aid eliminating unnecessary wear on your real suppressors while providing a realistic weight to your rifle for training. It's also a great way to fully enhance the appearance of your rifle by hiding excess barrel length. In addition, by removing the front cap, you can install any ½” x 28 AR threaded compensator for the functional purpose of reducing muzzle flash and recoil.

16” Midlength Dummy Suppressor

$49.99

The Strike Industries' Cobra Series dummy suppressor is designed as a training aid eliminating unnecessary wear on your real suppressors while providing a realistic weight to your rifle for training. It's also a great way to fully enhance the appearance of your rifle by hiding excess barrel length. In addition, by removing the front cap, you can install any ½” x 28 AR threaded compensator for the functional purpose of reducing muzzle flash and recoil.

14.5” Midlength Dummy Suppressor

$44.99

The Strike Industries' Cobra Series dummy suppressor is designed as a training aid eliminating unnecessary wear on your real suppressors while providing a realistic weight to your rifle for training. It's also a great way to fully enhance the appearance of your rifle by hiding excess barrel length. In addition, by removing the front cap, you can install any ½” x 28 AR threaded compensator for the functional purpose of reducing muzzle flash and recoil.

Fat Comp 01

$39.95

The Strike Industries FAT COMP (FC)! The FC comes in four different versions and is designed to integrate seamlessly with the SI Cobra Dummy Suppressor. The FAT COMP features four different styles made to fit any desired look. Its 1.5” diameter can also fit inside most free float handguard rail systems and directly attaches to any AR barrel with a 1/2”x28 thread pitch. All FAT COMPs are made of steel and coated with a matte black finish.

Fat Comp 02

$39.95
The Strike Industries FAT COMP (FC)! The FC comes in four different versions and is designed to integrate seamlessly with the SI Cobra Dummy Suppressor. The FAT COMP features four different styles made to fit any desired look. Its 1.5” diameter can also fit inside most free float handguard rail systems and directly attaches to any AR barrel with a 1/2”x28 thread pitch. All FAT COMPs are made of steel and coated with a matte black finish.

Fat Comp 03

$39.95
The Strike Industries FAT COMP (FC)! The FC comes in four different versions and is designed to integrate seamlessly with the SI Cobra Dummy Suppressor. The FAT COMP features four different styles made to fit any desired look. Its 1.5” diameter can also fit inside many free float handguard systems and directly attaches to any AR barrel with a 1/2”x28 thread pitch. All FAT COMPs are made of steel and coated with a matte black finish.

Fat Comp 04

$39.95
The Strike Industries FAT COMP (FC)! The FC comes in four different versions and is designed to integrate seamlessly with the SI Cobra Dummy Suppressor. The FAT COMP features four different styles made to fit any desired look. Its 1.5” diameter can also fit inside most free float handguard rail systems and directly attaches to any AR barrel with a 1/2”x28 thread pitch. All FAT COMPs are made of steel and coated with a matte black finish.

MITCH Handguard Rail Section

$19.95
Strike Industries has added a dynamic item on to the already amazing MITCH handguard rail. Three, one-piece, 6” Picatinny rail adapters will allow users to mount additional accessories to their rifle such as tactical lights, lasers, night vision devices, scopes, and reflex sights.

Dura Mount Series Sling Mount Adapter – Quick Detach (QD) Sling Swivel

$11.95
The Strike Industries quick disconnect (QD) sling swivel is a high quality, matte black, reliable quick disconnect that detaches from your rifle with a simple push of a button. Made to be used in conjunction with the Strike Industries Dura Mount Sling Mount adapter or Tactical Sling, the QD Sling Swivel is also compatible with most QD points on rifles and stocks.

2pcs Polymer 5 Slot KeyMod Short Rail Section

$19.95
Strike Industries introduces it line of Keymod rail accessories for the KeyMod handguard rail product line (MEGA FINS & AK TRAX). For those who want the lightest possible set up, we have a set of two piece standard polymer 5 section rails. Each polymer rail weights 0.4 oz. and can be place anywhere on the KeyMod rail. Our rail sections are made for our products but will work with most other KeyMod systems

Aluminum KeyMod Rail Section for 45 Degree Panel

$16.95
Strike Industries introduces it line of Keymod rail accessories for the Mega Fins handguard rail. We have a 5 section 45 degree Keymod and a 9 section 45 degree Keymod. Our 45 degree lines of rails are especially useful with the Mega Fins because of their easy plug-in capabilities. They’re a perfect way to run a magnified sight and a red dot at a 45 degree angle for shorter engagements. Our rail sections are made for our Mega Fins rails but will work with most other KeyMod systems

M4 AR-15 Lower Receiver Spring Kit

$8.00
The Strike Industries AR-15 lower Receiver spring replacement kit includes 9 important springs that are commonly replaced or easily lost when building stripped AR-15 lower receivers. The 9-Piece kit includes springs for the bolt catch, disconnector, buffer retainer, trigger, hammer, magazine catch, selector, and two detents.

M4 AR-15 Lower Receiver Spring Kit 20 Piece Gunsmith Box

$80.00
The Strike Industries AR-15 lower Receiver spring replacement kit includes 9 important springs that are commonly replaced or easily lost when building stripped AR-15 lower receivers. The 9-Piece kit includes springs for the bolt catch, disconnector, buffer retainer, trigger, hammer, magazine catch, selector, and two detents.

Bolt Catch

$9.95
The SI Bolt Catch is another piece in our line of high quality standard part for the AR. Its solid construction and clean matte black finish make it a great looking replacement or build project part. It’s a great value for an essential item. If you need the parts to keep your AR in top shape, look no further that S.I.

AR-15 Lower Receiver Pin Kit

$12.00

The Strike Industries pin kit is a valuable addition to your spare/replacement parts inventory. This kit is comprised of several important lower pins and detents. The kit contains takedown and pivot pins, takedown and pivot pin detents, hammer and trigger pins, selector detents, trigger guard roll pins, bolt catch roll pins and bolt catch plungers. If you're looking to assemble some stripped lower receivers or to replace worn out pins and detents, get your pin kit today! 

AR-15 Lower Receiver Pin Kit PRO kit

$140.00
The Strike Industries pin kit is a valuable addition to your spare/replacement parts inventory. This kit is comprised of several important lower pins and detents. The kit contains takedown and pivot pins, takedown and pivot pin detents, hammer and trigger pins, selector detents, trigger guard roll pins, bolt catch roll pins and bolt catch plungers. If you're looking to assemble some stripped lower receivers or to replace worn out pins and detents, get your pin kit today!

AR .223 / 308 Crush Washer - 1pcs

$1.95
Strike Industries offers replacement components for the AR-15 that are made to military specifications. Available in .223 calibers and .308, these high quality components will provide excellent fit and reliable function in your AR series rifle. They come in PRO sets which are 1 piece bulk packages. The S.I. crush washers are great for replacing your used ones and for installing a new muzzle device onto your AR.

Checkmate Comp (includes crush washer)

$39.95

The battlefield is a game of life and death. Any warrior will tell you having a mental toughness and a sharp mind will give you an advantage in the chess game of combat. It is with this in mind that Strike Industries introduces the “Check Mate” compensator! The Checkmate Comp is a top quality, multifunctional muzzle instrument that is designed with a series of four off-set serrated angled prongs which stabilize climb and recoil as well as reduce flash. The top port set to the right, benefits right-hand shooters with minimizing excessive climb. The aggressive front is an added feature that makes sure no one gets too close. The parkerized steel, design, and detail attest to the quality that SI continues to provide. The Check Mate is sure to dish out the maximum amount of royal pain! If you are interested in a blast shield be sure to check out our combination product page with the FF-CRD offering for this device!

Ambush Sling Loop

$26.50

The Strike Industries Ambush low profile sling loop is the lowest profile sling loop designed for the MIL-STD-1913 rail. Made of solid steel, its unique locking bar design system allows for it to be light weight and durable. Because the Ambush sits flat in between the rails, it will not interfere with your sights and fit neatly under longer optics when mounted towards the middle of the rifle. The dual purpose loop and swivel sling attachments allows the user to choose which mount they would like to use.

(QDSS not included)

AK Ambidextrous Strike Lock (AK Strike Lock Ambi)

$19.95
The Strike Industries’Ambidextrous Strike Lock is the most proficient, low profile, ergonomic magazine release lock on the market. Our unique design ensures flawless operation unlike other bullet buttons on the market that can be quite challenging either by not being able to fully engage the mag-release or the bullet slipping away. The SI AK-SL-AMBI installs in minutes with no alteration to rifle.

Aluminum Key-Mod Long Rail Section 6 Slots - QD featured

$17.95
Strike Industries proudly introduces its new line of Key-Mod Aluminum Rail Section accessories for the Key-Mod handguard rail product line (MEGA FINS & AK TRAX) implementing a Quick Detach receiver Point. By adding the Quick Disconnect receiver users have more placement options than ever before! There is a long type 8-slot KMARS-QD that comes in standard angle and a short 6-slot KMARS-QD piece that comes in a standard angle.

SI AR Steel Gas Block

$29.95
Fit to Mega Fins ver.1 handguard rail Simple and elegant the Strike Industries Steel Gas Block is manufactured to exacting tolerances and is a low profile block that will fit under whatever rail you use. All gas blocks are made to fit barrels that feature a .750 or 3/4-inch gas block mounting surface. With a heptagonal shape, it adds some thickness and strength to the gas block without sacrificing aesthetic appeal. Perfect for you next project!

AR Trigger Hammer Jig

$39.95
This easy to use apparatus allows full assembly and testing of any AR-15 trigger set up prior to installation on your rifle. The AR15 Trigger Jig allows you to clearly see the sear, hammer, and disconnector engagement points while under normal spring tension.

AK Shock Buffer

$8.95
With the success of our pistol buffers for Glock and Springfield XD pistols, we designed an AK buffer that would offer the same benefits such as recoil absorption and increased receiver durability. Unlike other AK buffers in the market, this buffer does not require disassembly of the recoil spring and drops in with minimal effort. Made from denser PVC polymer, it will stand up to lots of abuse before needing replacement.

AR-15/M16 Gas Tube Pistol Length 6 3/4" (stainless steel)

$9.95
This short gas tube is made specifically for your AR pistol. Fits currently available 6 1/4" to 7 1/2" pistol barrels. This will work great for replacing your old original gas tube or to complete your new build. Made out of high quality stainless steel. Each roll pin is slightly over-sized to accommodate most gas blocks and can be modified to fit smaller gas blocks.

AR Receiver Extension QD Endplate

$5.95
Our end plate is jam packed with loads of features. The first one being a quick detach (QD) build into it for true ambidextrous shooting. It also incorporates easy attachment points on both sides. You can use just about any sling on the market with this end plate.